这是我们第八集的海王星先端系列,我们将很快向您展示如何调整你的pH值调查。步骤1:删除保护在调查。不要担心如果有一些白色的外壳,它只是有点盐蠕变的存储解决方案。第二步:点击中心按钮AquaController打开主菜单,向下滚动到设置,然后向下滚动到博士提示:一定要点击按钮,而不是捣碎,将可能导致你通过选择和搞砸你的校准。步骤3:它将要求您输入您的低的解决方案并按enter键。我们用7,但是你可以改变它。步骤4:撕裂或切断的角落里你在一个角度校准包和插入探针探头尖端是完全淹没。提示:在这一点上显示应该说“安顿”与一些附近开始改变。如果不改变,那可能是因为你忘了把BNC连接器到顶点。第五步:一旦不移动10 - 20秒数,把好。 Step 6: Select 10 for your high solution and shake the probe off. TIP: I like to wipe the outside of the probe off so the solution on the outside doesn't throw the next packet off. Step 7.Insert the probe and repeat the same steps as you did with the low pH. Once the number stops moving, hit OK and you're done. TIP: If you leave the probe in the solution, you can go to the home screen and it should say 10. You could also put it in the seven and do the same to be sure it's calibrated to both points (but keep in mind it may not be exactly seven, as you may have a bit of the ten solution in the seven) If you have any questions or calibrating tips for your fellow reefers checkout the comments area below! Check out the entire Apex line: http://brs.li/neptuneapex Watch the whole playlist: https://www.youtube.com/playlist?list=PLBaMLrfToJyz8091y-PoECoUo5QfMGg1S Connect with us on Facebook: http://www.facebook.com/BulkReefSupply Check out our pics on Instagram: http://instagram.com/bulkreefsupply