配置加热器和冷却器是一个相当简单的过程,其中一个最简单的出口配置工具的融合。我们先来配置你的加热器;从控制类型下拉列表选择“加热器”。选择:回退这个选项要求如果能量棒得到断开Apex基本单位,你会想要出口默认打开或关闭。你可以想象,强烈建议您这个选项设置为“关闭”选项:探头名称选择“临时”的调查。(除非你有不止一个温度探头,你只会有一个选项说“临时”。)提示:当温度探测器什么似乎是一个塑料帽类似于其他探针,但是这个不是为了被删除。对温度的选择:选择您想让你的加热器的温度打开(低于你理想的水箱温度)选项:温度选择温度你想让你的加热器关闭在你理想的槽(温度)提示:减少加热器打开/关闭太多(可以穿出你的加热器),并保持温度波动最小,设置上的温度1度低于你‘Off’(理想)的温度。完成按发送到顶端。你可以遵循相同的步骤程序冷却器出口,但是您可能希望检查与冷水机组的制造商在适当的温度循环。提示:你不想要的压缩机冷却器打开/关闭每几十分之一度变化发生在你的油箱。 It's most likely you'll set it as a one to two degree variance, depending on the brand of chiller and what is in your tank. One final note; you can use the chiller control type for fans, also. You can also use a second temperature probe to measure the ambient temperature of your hood, or room. The probe does not need to be submersed in water for it to work. If you have questions or advice for your fellow reefers checkout the comments area down below. Don't miss our next episode, hit that subscribe button! :) Check out the entire Apex line: http://brs.li/neptuneapex Watch the whole playlist: https://www.youtube.com/playlist?list=PLBaMLrfToJyz8091y-PoECoUo5QfMGg1S Connect with us on Facebook: http://www.facebook.com/BulkReefSupply Check out our pics on Instagram: http://instagram.com/bulkreefsupply